Plocher® Kat helps improve water taste and vitality for your animals, contributing to their good health and water consumption.
Trust your animals! They know what's best for them!
Animals don't read reports or studies. They have no preconceived notions or biases. Their instinct simply tells them what is good or not for them. Offer your animals to drink "plocherized" or "non-plocherized" water: Unequivocaly, you'll see them run for "plocherized" water with increased vitality and improved taste!
"Since I installed the Plocher catalyzer to vitalize my water, my cows refuse to drink non treated water. And there's no more need for a water softener!" W.B. Dairy farmer, St-Sylvère (Quebec)
"We have purchased the Plocher Kat catalizers to improve the quality of our water. The results are truly amazing: We have increased milk production by two (2) litres per cow, per day; the cleaning of the milk line is much more easier and the taste of the water has really improved!" M.H. Dairy farmer, Warwick (Quebec)
"With the Plocher® Kat, water is as soft as with a water softener, without the inconvenience of the salt that the cows end up drinking, and that we have to add on a regular basis." D.R. St-Camille (Quebec)
Increased profitability with Plocher® Kat!
If cows drink more water, and of better quality, they produce more milk... Simple as that! This trial report shows an increase of 22% three weeks only after the installation of the Plocher® Kat catalizers. Read the full report here.
Operation / Installation
The Plocher® Kat works without electricity or magnetism, i.e. without any conventional energy.
The Plocher® Kat is installed very easily and without intervention on the water pipeline of the housing, commercial premises, industrial, agricultural ... The installation is simply done with a screwdriver, the skills of a professional are not required.
The Plocher® Kat is maintenance-free! And its restructuring action on your water is continuous and permanent!
Important: Electrical sources (electric meter, motor, electrical cable, etc.) interfere with the operation of the Plocher® Kat. For optimal performance, we recommend the installation of Plocher® E-Smog protection angles.
The Plocher® Kat can be installed on any type of pipes (galvanized, stainless steel, copper, polyethylene, etc.) Do not install Plocher® Kat on lead or lead pipes or sleeves.
The Plocher® Kat is installed after the meter and the pressure reducer. It is recommended to purge the lines after 2 weeks of use.
Keep it away from water spray. In the case of immersion, even momentary, the Plocher® Kat could be seriously damaged.
The large model (HW 4611) can treat up to 1500 litres per day. For larger consumptions, several devices can be installed. You will need one catalizer for every 1500 liters (1,5 m3)of water consumed per day. An industrial capacity model is also available for larger installations. Please contact us so we can advise you on the model best suited for your needs.
Plocher® Kat - large model
Product #: HW 4611
Size: 26 cm x 12 cm x 3 cm
Can be installed on pipes from 20 mm to 70 mm in diameter and can vitalize up to 1500 litres per day.